BWTM
We've been using Dan's services for years. He is extremely capable and always makes sure the job is done as it should be. Highly recommended
Air Source Heat Pumps in Bromley
MCS certified installs with the Boiler Upgrade Scheme handled for you
Air Source Heat Pumps
Aspie Plumbing & Heating Ltd is MCS certified under number APH-48289 and installs air source heat pumps across Bromley, Chislehurst, Bexley and Sevenoaks. Being MCS certified means we can process the Boiler Upgrade Scheme application on your behalf if your property is eligible. Pricing is quoted after a full heat loss survey, and all renewable work is carried out under the RECC consumer code.
An air source heat pump takes heat out of the outside air and moves it into your heating and hot water. It runs at a lower flow temperature than a boiler, so the system around it has to be designed properly rather than simply swapped over. That is the part most people get wrong, and it is the part Dan spends the most time on.
Every installation starts with a room-by-room heat loss survey. That tells us what the property actually needs, which radiators or underfloor circuits have to change, what size cylinder is required and which unit is the right fit. You get the numbers behind the recommendation, not just a price.
Aspie Plumbing & Heating Ltd is MCS certified under certificate number APH-48289. That certification is what allows us to process the Boiler Upgrade Scheme application for eligible customers, so the grant comes off your quote rather than being something you have to chase yourself. We will confirm eligibility before any work is agreed.
For all renewable technologies, including air source heat pumps, we adhere to the RECC rules. The Renewable Energy Consumer Code covers things like quotations, deposits, cancellation rights and how complaints are handled. You can read it in full at recc.org.uk and you are welcome to contact us for more information.
PRICE GUIDE Quoted after survey
BUS grant Applied for on your behalf
MCS number APH-48289
SURVEY Heat loss calculated
Consumer code RECC
Coverage Bromley to Sevenoaks
Our Work
-
-
Madeline Wilson
Very impressed with Dans work and would recommend!
-
Susan Manchester
Dan always does a brilliant professional job, and always does his best to help out when we have had an emergency! The best plumber and heating engineer we have ever had.
-
Lesley Brook
We have always had exceptional service from Dan at Aspie Plumbing and Heating. He is highly professional, very reliable and has always done excellent work for us at a very fair price. We have no hesitation in recommending him.
-
Emma B
Dan has been my go to for several years now and wouldn’t hesitate to recommend him. He’s always reliable, professional and trustworthy, and I know I can count on him whenever I have a plumbing or heating issue (which I had lots of in my previous property when I moved in!). He always takes the time to properly assess the problem and looks for the most efficient and cost-effective way to resolve it, rather than recommending unnecessary work.
-
Zombieon
Dan is a very skilled and reliable professional plumber, we have used him on multiple occasions and would highly recommend him to anyone!
-
Hannah
Dan is an amazing plumber, we have had him work on a number of projects in our home including a full bathroom remodel and new boiler. He is friendly, hard working, and considerate, always leaves the job neat and tidy and does not mind our overly friendly dogs!
-
Jay Lea
I cannot recommend Dan from Aspie Plumbing & Heating highly enough. If you’ve ever had to deal with tradesmen who turn up late, leave a mess, or give vague estimates, do yourself a huge favour and just call Dan instead. He is a breath of fresh air. Right from the start, his communication was top-tier. He turned up exactly when he said he would. His reliability and punctuality are completely flawless. When he looks at a job, he diagnoses the issue quickly, explains the options clearly without trying to oversell unnecessary parts, and provides a very fair, transparent price. His workmanship is incredibly meticulous. He takes genuine pride in doing a proper, high-quality job rather than rushing through it. What really blows me away, though, is how clean he leaves the place. A lot of workmen leave a trail of chaos behind them, but Dan leaves the work area completely spotless, cleaning up after himself thoroughly before leaving. He is absolutely brilliant, professional, and reliable. Dan is officially my permanent go-to for any plumbing and heating needs moving forward. A well-deserved 10/10! Thank you very much for all you do Dan.
-
matt w
We recently had a new combi boiler installed by Aspie Plumbing & Heating Ltd, and we couldn’t be more impressed with the workmanship and level of service we received. The standard of work was exceptional, and Dan’s knowledge and expertise were clearly evident throughout the entire installation. Having used other heating engineers in the past, we were genuinely impressed by the attention to detail and professionalism shown by Aspie Plumbing & Heating Ltd. Dan’s communication from start to finish was excellent. He kept us fully informed at every stage, clearly explained what was being done and gave us complete confidence throughout the project. The work was carried out to an exceptionally high standard, with everything left clean and tidy at each stage. It’s clear that Dan takes great pride in his work and is committed to delivering a first-class service. We are absolutely delighted with our new boiler and the service we received from Aspie Plumbing & Heating Ltd. We would have no hesitation whatsoever in recommending them to anyone looking for a reliable, knowledgeable and highly professional plumbing & heating company.
-
Davina Cloke
Dan is polite and a caring plumber. He's done a few different jobs for me, from boiler serving, fixing a radiator leak to replacing my flush valve. He's great at talking through the issue on the phone and takes time to ensure the job is completed to a high standard. Would recommend him 👌
-
Elizabeth Seamons
Dan from Aspie plumbingDid an excellent job he was skilled in what he does very knowledgeable quick and very reasonable. I would defiantly use him again
-
AdotH92
Have used Dan’s services multiple times and the work is always done to a high standard. I will carry on using him and recommending his service!
Frequently Asked Questions
Air Source Heat Pumps Questions
Are you MCS registered?
Yes. Our MCS certification number is APH-48289. We are able to process the application for the Boiler Upgrade Scheme for eligible customers, so the grant is deducted from your quote rather than being something you have to claim back yourself.
What is the Boiler Upgrade Scheme?
It is a government grant towards the cost of replacing a fossil fuel heating system with a heat pump. Only MCS certified installers can apply for it, and we handle the application on your behalf. We confirm whether your property is eligible before any work is agreed.
How much does a heat pump cost?
Heat pumps are quoted after a full heat loss survey, because the price depends on the size of unit, the cylinder, and how much of the existing system needs changing. Quoting a heat pump without that survey is how people end up with a system that does not heat the house.
Do I need new radiators for a heat pump?
Sometimes, but not always. A heat pump runs at a lower flow temperature than a boiler, so each radiator has to be big enough to give out the same heat at that lower temperature. The heat loss survey tells us room by room which ones need changing and which are already fine.
What is the RECC consumer code?
For all renewable technologies, including heat pumps, we adhere to the RECC rules. The Renewable Energy Consumer Code is approved by the Chartered Trading Standards Institute and covers quotations, deposits, cancellation and cooling-off rights and how complaints are handled. You can read it in full at recc.org.uk and you are welcome to contact us for more information.
Will a heat pump work with underfloor heating?
Very well. Underfloor heating runs at a low flow temperature by design, which is exactly what a heat pump wants, so the two together are usually the most efficient combination we can fit.